RFMW, Ltd. announces design and sales support for a highly rugged, N-channel, enhancement-mode, LDMOS transistor from NXP Semiconductors. The MRF085H provides 85 watts of power for various applications from 1.8 to 1.215GHz. With unmatched input and output ports, the MRF085H offers narrow-band and wide-band performance. Highly rugged, the device is designed for use in high VSWR industrial, scientific and medical applications and sub-GHz aerospace and defense and mobile radio applications. Suitable for linear applications such as radio transmitters, the device can be used single-ended or in a push-pull configuration and is characterized from 30 to 50V for ease of use.
Author: RFMW
RFMW, Ltd. announces design and sales support for a series of Darlington pair SiGe gain block amplifiers from Qorvo. Operating over frequency ranges as high as DC to 5000MHz, the six gain blocks in this series (QPA0363A, QPA2263A, QPA4263A, QPA4463A, QPA4363A, QPA4563A) offer gain and output power options for applications in LTE infrastructure, repeaters, Test & Measurement and defense/aerospace. Operating from single, positive voltage supply allows a variety of voltage rails with simple dropping resistors to create a nominal 2.5V device bias. Internally matched, the gain blocks are cascadable and available in SOT-363 packaging.
RFMW, Ltd. announces design and sales support for Sangshin Elecom’s high gain chip antennas. The KSCA-B2450MA provides 2.8dBi peak gain at 2643MHz and is offered as a metal clip measuring 35x50mm. Bandwidth is +/- 30 MHz. The KSCA-B2450MA is linearly polarized with minimum center frequency return loss of 15dB. Center fed, the antenna is easily mounted onto printed circuit cards for various applications. Alternate center frequencies, bandwidths and configurations are available depending on customer specific requirements.
RFMW, Ltd. announces design and sales support for a high power termination from Smiths Interconnect. The 12-3001SM handles 15 Watts of average power from DC to 18GHz. With an aluminum base housing and stainless steel coupling nut, this SMA connectored termination has an operating temperature of -55 to +125 degree Celsius and is rugged enough for system use as well as laboratory environments. Maximum VSWR is 1.20:1. Nominal impedance of the 12-3001SM is 50 ohms.
RFMW, Ltd. announces design and sales support for an NXP, RF power, LDMOS transistor. The AFT31150N provides 150 watts for S-band radar systems in maritime and weather radar applications between 2700 and 3100MHz. Qualified up to a maximum of 32 V operation, the AFT31150N offers 17dB of gain. Typical efficiency is 50% and the device is internally matched for ease-of-use. The source terminal is located on the exposed back side of the SOT1693-1 plastic package.
RFMW, Ltd. announces design and sales support for SSMP, miniature blind mate connectored cables assemblies from P1dB, Inc. Operational to 40GHz, the SSMP connector is also known as SMPM or Mini-SMP and is compatible with GPPO™. Due to high frequency performance and small size, SSMP connectors find applications in commercial and defense related products. Optical and high performance analog designs benefit from broad frequency coverage while high-density RF cards in the defense sector benefit from the small size/weight. P1dB offers SSMP connectors on either .085 or .047 flexible cable with straight, right angle or bulkhead connector options. The cable end…
RFMW, Ltd. will highlight new products and technologies at the European Microwave Week 2017 Exhibition to be held in Nuremberg, Germany October 10th to 12th. Located in Booth 196, RFMW Europe will provide product demonstrations and information on high power transistors and amplifiers, MMIC amplifiers, board level switches, attenuators, terminations, filters and other RF components important to design engineers. In addition, RFMW Europe will offer T&M accessories and RF cable assemblies for design and production test environments. Sales engineers and application specialists will be on hand to support specific project questions and component design considerations. RFMW, it’s who we are,…
RFMW, Ltd. announces design and sales support for a high power transistor from Ampleon. The BLF898(S) is a 50 Volt LDMOS power transistor for use in UHF (Digital) Television Broadcasting and CW /pulsed CW Industrial, Scientific and Medical (ISM) applications. With 180W (average) DVB-T power capability in class-AB, the BLF898(S) offers the highest power available in a single transistor for the UHF Broadcast market making it extremely well suited for the new ATSC 3.0 broadcast standard which requires a higher peak-to-average power capability than the previous ATSC standards. Excellent ruggedness, capable of withstanding output mismatches equal to 40:1, makes it…
RFMW, Ltd. announces design and sales support for the Qorvo QPA2463C. Spanning 50 to 4000MHz, the QPA2463C is an active bias, cascadable, HBT, MMIC amplifier which utilizes a Darlington configuration for high linearity applications such as those found in LTE infrastructure and defense/aerospace. Offering 15dB of gain, the amplifier runs directly from a 3V supply with no dropping resistor required and draws only 20mA. The patented active bias circuitry provides stable current over temperature and process variations. P1dB is 10.8dBm and OIP3 is 22dBm. Internally matched to 50 ohms, it’s offered in a SOT-363 package.
RFMW, Ltd. announces participation at the European Microwave Week 2017 Exhibition to be held in Nuremberg, Germany October 10th to 12th. European Microwave Week is Europe’s largest exhibition centered on microwave products, technology and applications. This conference and exhibition is where RF design engineers learn about the latest topics and new products important to the RF and Microwave industry. As an exhibitor, RFMW Europe is highlighting products and technologies from key supplier partners in booth 196. RFMW is the premier, pure-play, RF and Microwave distribution provider. Sales engineers and application specialists will be on hand to support specific project questions…