RFMW, Ltd. announces participation at the IMS2016 IEEE symposium to be held in San Francisco, CA May 24-26th. IMS (International Microwave Symposium) is the premier conference and exhibition for RF design engineers to learn about the latest topics and new products important to the RF and Microwave industry. As an exhibitor, RFMW is offering free application presentations on the show floor (booth 649) highlighting products and technologies from key supplier partners including: • Ampleon • API Technologies • EMC • Frontier Electronics • Peregrine Semiconductors • Qorvo • Sangshin • Skyworks • Telemakus RFMW is the premier RF and Microwave…
Author: RFMW
RFMW, Ltd. announces design and sales support for a dual section, 2-stage power MMIC targeted as a general purpose driver or final stage amplifier in small cell applications in the 700 to 1000MHz frequency range. Ampleon’s BLM8G0710S-30PBG offers >51% typical drain efficiency and on-chip matching for ease of use. Ampleon designers integrate internal ESD protection for enhanced reliability. The BLM8G0710S-30PBG power MMIC is created using Ampleon’s GEN8 LDMOS technology and can support a number of circuit topologies including Doherty, Quadrature combined, Push-pull or single ended. Bias is independently internally temperature compensated for both stages. The BLM8G0710S-30PBG has a small signal…
5/4/2016 – San Jose, California: RFMW Ltd. and SANAV announce a distribution relationship allowing RFMW to promote and sell SANAV products worldwide. SANAV offers both standard and custom antenna solutions for multiple markets. Under the agreement, RFMW will support SANAV’s antenna activity, including sales of their GPS, GNSS, 4G, UHF, WiFi and MIMO antennas. With years of manufacturing experience combined with innovative design capabilities, SANAV offers antennas capable of supporting the latest technologies such as GPS/GNSS+3G, GPS/Glonass+3G+UHF,GPS+4G+WiFi, GPS+LTE- MIMO + WiFi – MIMO and so on. Hershey Tsai, General Manager of SANAV comments, “RFMW’s strategy of providing customers with component…
RFMW, Ltd. announces design and sales support for the MiniRF MRFXF0024, a 1:1 impedance ratio, transmission line transformer covering frequencies from of 45 to 1200MHz. Capable of supporting DOCSIS3.1 requirements, the MRFXF0024 is designed for applications requiring low loss and where noise figure (NF) concerns are critical. Characteristic impedance is 75 ohms and insertion loss ranges from 0.4dB for return path applications to 0.6dB for downstream circuits. The MRFXF0024 has excellent amplitude and phase balance and capable of handling a maximum 2 watts RF input. An industry standard S-20 package is RoHS compliant and available in tape and reel for…
RFMW, Ltd. announces design and sales support for Qorvo’s RFVC6405 voltage controlled oscillator. The RFVC6405 covers the full 2-4GHz (S-band) in a single device with exceptional performance. Output phase noise is -90 dBc@10K offset (typ.) with second harmonic suppression of -15dBc. With an output power of 0dBm, the RFVC6405 draws 25mA from a 5V supply. Tuning voltage is 0-16Vdc. This Qorvo VCO is housed in a 0.5×0.5 inch castellated package and operates over a temperature range do -40 to +85 degrees Celsius.
RFMW, Ltd. announces design and sales support for Ampleon’s BLM8G0710S-30PBG, a dual section, 2-stage power MMIC targeted as a general purpose driver or final stage amplifier in white space or ISM applications in the 700 to 1000MHz frequency range. The BLM8G0710S-30PBG offers >51% typical drain efficiency and offers on-chip matching for ease of use. Ampleon designers integrate internal ESD protection for enhanced reliability. The BLM8G0710S-30PBG power MMIC is created using Ampleon’s GEN8 LDMOS technology and can support a number of circuit topologies including Doherty, Quadrature combined, Push-pull or single ended. Bias is independently internally temperature compensated for both stages. Small…
RFMW, Ltd. announces design and sales support for API Technologies’ 345C single channel rotary joint. API rotary joints are used to transmit RF energy from a stationary RF source to a rotating RF line and find applications in military and commercial markets such as mobile satellite communication systems, radar systems including civil air traffic control, weather radars or anywhere rotational force might damage a transmission line. The 345C operates from DC to 18GHz using SMA coaxial connectors. VSWR is as low as 1.02:1. Capable of handling up to 500 watts peak or 100 watts average power, this rotary joint can…
RFMW, Ltd. announces design and sales support for a new transformer from MiniRF. The MiniRF MRFXF0025 is a 1:1 impedance ratio, transmission line transformer covering a frequency range of 45 to 1200MHz. Capable of supporting DOCSIS3.1 requirements, the MRFXF0025 is designed for applications that require superb gain balance in a very small, low cost, and highly reliable surface mount package. Characteristic impedance is 75 ohms and insertion loss ranges from 0.7dB to 0.8dB across the device band width. The MRFXF0025 boasts power handling capability of 2 watts. The industry standard S-20 package is RoHS compliant and available in tape and…
On Tuesday, April 19th 2016, Qorvo announced that RFMW, Ltd has earned their prestigious Global Distributor of the Year award. Specifically noted by Qorvo in presenting RFMW with the award was the quality of the RFMW Sales, Marketing and Product Management teams and the way RFMW works with Qorvo as extentions of their own teams in those areas. President and CEO of RFMW, Ltd, Joel Levine said “This is definitely a team effort and I’d like to give kudos to those team members who contribute to our success with Qorvo on an hourly basis, always working the issues between the…
RFMW, Ltd. announces design and sales support for the QPQ1291, a highly selective, low drift, BAW filter for full Band 41 TDD-LTE Tx/Rx. The Qorvo QPQ1291 has excellent WiFi rejection of 39dB at WiFI channel 11, yet only 3.8dB in-band insertion loss. Performance is rated over -20 to +85 degrees Celsius. Available in a RoHS compliant, 2.0×1.6mm SMT package, return loss of the QPQ1291 is 9dB.