RFMW, Ltd. announces design and sales support for a low power, highly integrated, IQ modulator with integrated fractional-N synthesizer and voltage controlled oscillator (VCO). The Qorvo RFMD2080 can generate output frequencies of between 45MHz and 2700MHz, making it suitable for a wide range of applications such as satellite communications, QPSK/QAM modulators, SSB modulators and Software Defined Radios (SDR). The RFMD2080’s fractional-N synthesizer offers very low spurious levels with typical step size of 1.5Hz. Typical noise floor is -150dBm/Hz. Programable via serial interface, P1dB is 4dBm and the device runs from a 3-3.3V supply consuming 155mA. Qorvo offers this I/Q modulator…
Author: RFMW
RFMW, Ltd. announces design and sales support for a voltage variable attenuator (VVA) for instrumentation, radar, communications and EW platforms in the 2-31GHz frequency range. The Qorvo TGL2767-SM features a 20dB attenuation range with < 2dB of insertion loss. I/O return loss is >12dB. The TGL2767-SM is available in a 3x3mm SMT package or in DIE form as the TGL2767.
RFMW, Ltd. announces design and sales support for body worn antennas from Southwest Antennas. Model 1065-031 is a right-hand, circularly polarized (RHCP) antenna while model 1065-032 offers left-hand polarization (LHCP). Developed to offer high performance, rugged antenna options, the antenna radome housing is resistant to damage from drops, being stepped or jumped on, and other potential abuse. Both 1065-031 and 1065-032 antennas are designed for use with handheld or body worn MIMO / MANET radio systems operating from 1350 to 1390MHz. Circular polarization offers performance enhancements in multi-antenna radio configurations, crowded RF / non line-of-sight scenarios, and improved performance in…
RFMW, Ltd. announces design and sales support for a high linearity MMIC power doubler designed to support DOCSIS 3.1 CATV requirements. The Skyworks ACA1216 offers 27.5dB typical gain at the upper end of its 50 to 1218MHz frequency range. Ideal for hybrid fiber coax (HFC) equipment including line extenders, nodes, system amplifiers and headend equipment, the ACA1216 operates using 12V and 725mA. Control pins allow independent control of input and output stage currents. CTB is measured at 78dB while Xmod is -66dB and CSO is -70dB. The SOIC16 wide-body package has a heat slug leaving plenty of margin for heat…
RFMW, Ltd. announces design and sales support for a voltage variable attenuator (VVA) for instrumentation, radar, communications and EW platforms in the 2-25GHz frequency range. The Qorvo TGL2767 features a 20dB attenuation range with < 2dB of insertion loss. I/O return loss is >12dB. The TGL2767 is available in DIE form and packaged (TGL2767-SM).
RFMW, Ltd. announces design and sales support for a 2.4GHz BAW filter designed for coexistence of WiFi and LTE signals. The Qorvo 885135 offers single ended operation at 2.4GHz with band-edge rejection at 2390MHz and 2483.5MHz. Capable of handling up to 28dBm average power, the 885135 has extended temperature performance over -40 to +95 degrees C. Hermetically sealed, this filter lends itself to outdoor applications in 802.11a/n/ac WLAN CPEs, mobile routers, smart meters, and small cell base stations. In-band insertion loss is 0.9 to 1.2dB while band edge isolation is up to 20dB. The 885135 is available in a 1.7×1.3×0.46mm…
RFMW, Ltd. announces design and sales support for the Skyworks Solutions SKY65903-11, front-end module (FEM) featuring a low-noise amplifier and integrated pre- and post- filters for GPS receiver applications. Designed for high performance in the frequency range of 1559-1606 MHz, this Skyworks module ideal for global positioning and navigation satellite systems in end products such as fitness/activity trackers, watches, pet trackers, smartphones and tablets. The SKY65903-11 features in-band IIP3 of -7.3dBm, small signal gain of 14.2dB and noise figure of 1.7dB for improved signal-to-noise ratio. Integrated pre- and post-filters provide low in-band insertion loss and excellent rejection (76dBc @ 2.4GHz)…
RFMW, Ltd. announces design and sales support for a 100W power handling VPIN limiter from Qorvo. The TGL2210-SM is available in a QFN 4x4mm surface mount package for ease of installation in commercial and military radar receiver protection chains as well as communications systems and electronic warfare applications. The TGL2210-SM covers applications ranging from 50 to 6000MHz with flat leakage of <17dBm. This Qorvo limiter offers <0.7dB insertion loss and does not require DC bias. Input/output return loss measures 11dB.
RFMW, Ltd. announces design and sales support for a driver amplifier designed to support HPA implementation from 13 to 18GHz and providing 2W of saturated output power. The Qorvo TGA2958-SM is compatible with GaN HPA bias conditions allowing it to run from the same supply as the high-power amplifier. The TGA2958-SM, 3-stage driver, has a small signal gain of >25dB yet draws only 70mA of CW bias. Ideal for applications in Radar, Satellite Communications and Data Links, the Qorvo TGA2958-SM is offered in a 4x4mm QFN package.
RFMW, Ltd. announces design and sales support for SANAV antenna implementations. Focusing on sub-1GHz products such as ISM band “Smart” meters (433/868/915MHz), SANAV supports water, gas and electrical meters with a variety of antenna options. SANAV offers standardized antennas as well as customer specific designs based on frequency, available size, materials, etc. SANAV antenna solutions can be tuned to the enclosure to optimize RF performance. Contact RFMW today for more information.