RFMW, Ltd. announces design and sales support for a 100W forward power/20W reverse power, Surface Mount isolator from RFCI. The RFSL5401R covers a 55MHz bandwidth from 1625 to 1680MHz. Typical insertion loss of the RFSL5401R is <0.25dB while isolation is typically >25dB. RFCI SMT isolators are designed for maximum performance yet are competitively priced for both small production runs or high volume requirements. The RFCI RFSL5401R finds applications in satellite data terminals. RFCI has an extremely broad range of surface mount, drop-in and coax isolators and circulators up to Ku band for both low and high power applications.
Author: RFMW
RFMW, Ltd. announces design and sales support for a 100 to 3,000MHz GaN amplifier offering a saturated output power of 12W. The TriQuint TGA2216 is available as a 1.8×1.8mm DIE and services applications in electronic warfare, communications systems and RADAR. The TGA2216 provides 22dB of small signal gain and 14dB of large signal gain with Power Added Efficiency (PAE) of >40%. For linear applications, P1dB is rated at 34dBm with IM3 at -30dBc. The TGA2216 MMIC allows lower BOM count, reduced board space and higher efficiency than transistor alternatives. TriQuint intends to offer a QFN packaged device in 2014.
RFMW, Ltd. announces design and sales support for the T2G6001528-SG from TriQuint. This wide band, unmatched transistor offers up to 15W P3dB of power from DC to 6GHz. GaN on SiC HEMT enables efficiencies up to 77%. The T2G6001528-SG is offered in a gull wing package, a TriQuint first, for SMT mounting on PCBs. >15dB of gain is available mid-band. Running off a 28V supply, TriQuint’s T2G6001528-SG finds applications in commercial and military radar, communication systems, test instrumentation and wideband amplifier designs.
RFMW, Ltd. announces design and sales support for Sangshin Elecom triplexers targeting avionics applications for Automatic Dependent Surveillance-Broadcast (ADS-B), Universal Access Transceiver (UAT) and Traffic Collision Avoidance System (TCAS). Sangshin’s TPX978/1030/1090SA triplexer offers excellent isolation of 45dB between each band along with only 2.5dB of insertion loss. The TPX978/1030/1090SA can handle 3W of power and is available in a 55mm x 22m x 7mm surface mount package. In addition to the Sangshin TPX978/1030/1090SA triplexer, Sangshin also offers complimentary, single-band filters covering the same bands. The MBP44RC1030S15C, MBP44RC1090S15C, and MBP44RC978S05C are centered at 1030MHz, 1090MHz, and 978MHz respectively. All three filters…
RFMW, Ltd. announces design and sales support for TriQuint’s 30MHz to 2.5GHz TGA2237 with >52% PAE. The TGA2237 offers 10W saturated power with 13dB of large signal gain. P1dB is rated at >32dBm with a small signal gain of 19dB. TriQuint’s TGA2237 operates from a 30V supply and uses only 360mA of current. Broadband performance of this GaN device makes the TriQuint TGA2237 ideal for Radar, communications and electronic warfare applications. Available in DIE for small for factor requirements.
RFMW, Ltd. announces design and sales support for the TGA2576-2-FL from TriQuint. This 2.5 to 6GHz GaN power amplifier provides 40W of saturated output power with power added efficiency (PAE) of 36%. Suitable for EW, Radar, test instrumentation, communications systems or as an EMC amplifier, the TriQuint TGA2576-2-FL operates at 30V and 1.55A from its bias supply. Small signal gain is 29dB while large signal gain is 20dB. For ideal thermal management and handling, the TGA2576-2-FL is offered in a CuW-based flanged package and can operate in both CW and pulsed modes.
RFMW, Ltd. announces design and sales support for wideband, DC-3.5GHz GaN transistors from TriQuint. Available as the T2G4003532-FS earless package or the T2G4003532-FL, both transistors are input prematched for S-band operation. The devices are constructed with TriQuint’s proven TQGaN25 process, which features advanced field plate techniques to optimize power and efficiency at high drain bias operating conditions. This optimization can potentially lower system costs in terms of fewer amplifier line-ups and lower thermal management costs. Both the T2G4003532-FS and T2G4003532-FL operate at 32V and find applications in both Radar and communication systems.
RFMW, Ltd. announces design and sales support for the TGA2612 from TriQuint. Optimized for performance from 6-12GHz, the TGA2612 features >22dB small signal gain with 20dBm P1dB. Noise figure is <1.8dB while OIP3 is an industry leading 29dBm. Designed with TriQuint TQGaN25 GaN process technology, the TGA2612 finds applications in X-band radar as well as commercial and military communication systems where the ability to survive up to 2W of input power without performance degradation possibly eliminates the need for a power limiter. To simplify system integration, the TriQuint TGA2612 is fully matched to 50 ohms with integrated DC blocking caps…
RFMW, Ltd. announces design and sales support for TriQuint’s TAT7460B1A, linear, 75-ohm, CATV amplifier. Designed for use from 50MHz up to 2600MHz, the TAT7460B1A addresses CATV and Satellite bands in a single part. 17dB of gain is available from this 5V, 100mA amplifier which offers noise figure of 3dBm up to 1600MHz. Available in an industry standard, SOT-89 package, applications for the TriQuint TAT7460B1A include drop amplifiers, FTTH systems, video ONUs, MDUs and CATV-SATV systems.
RFMW, Ltd. announces design and sales support for a 5GHz, 802.11 a/n/ac compliant WLAN Front End Module (FEM) from TriQuint. The TQP8080 combines an LNA with bypass mode and a PA with integrated power detector through an SPDT T/R switch. Optimized for next generation WLAN integration, the TriQuint TQP8080 provides outstanding stable performance across temperature and voltage range due to a temperature compensated bias network. Internally matched input and output ease design as does CMOS compatible control voltages. The TriQuint TQP8080 is housed in a 2.5×2.5×0.4mm QFN package.