RFMW Ltd., announces the availability of a new white paper explaining the properties and advantages of various conductive rubber materials for use in RFI/EMI mitigation. Authored by the Vice President of Electrical Engineering at MAJR Products, an internationally recognized manufacturer of Electromagnetic Interference / Radio Frequency Interference (EMI/RFI) Shielding Products located in Northwest Pennsylvania, the paper highlights three common material types; Multicon, Conductive Elastomer and Radthin. Process techniques are outlined with links to additional information. A specification table aids in product selection for those considering the use of conductive rubber materials in their designs. MAJR Products are supported through their…
Author: RFMW
RFMW, Ltd. announces design and sales support for Skyworks SKY13446-374LF, a high isolation SPDT switch covering 0.1 to 6.0GHz. Targeted at WLAN applications in the 2.4 – 2.5GHz and 4.9-5.9GHz bands, the SKY13446-374LF offers 38 and 30dB typical isolation respectively. Low insertion loss improves transmit signal efficiency. Excellent EVM performance is attributed to linearity of 32-33 dBm P1dB. The SKY13446-374LF incorporates two control voltages for Tx/Rx switching and is packaged in a 1.5×1.5mm QFN.
RFMW, Ltd. announces design and sales support for a pair of high power GaN SPDT switches from TriQuint. The TGS2352-2-SM covers frequencies from 500MHz to 12GHz and handles input power up to 20W while the TGS2353-2-SM extends frequency coverage to 18GHz and handles up to 10 watts of input power. Both the TGS2352-2-SM and TGS2353-2-SM offer switching speeds <35nS and control voltages of 0V / -40V. Insertion loss and isolation for the TGS2352-2-SM are <1dB and 35dB typical respectively. For the 18GHz version, the TGS2353-2-SM, insertion loss and isolation are <1.5dB and 30dB typical. Both switches are offered in a…
RFMW, Ltd. announces design and sales support for three new TriQuint Bulk Acoustic Wave (BAW) filters serving the wireless infrastructure market: • TQQ7303 is targeted at Band 3 Uplink applications at 1747.5MHz • TQQ7307 is targeted at Band 7 Uplink applications at 2535MHz • 885069 is targeted at Band 40 applications All three filters offer low in-band insertion loss and high out-of-band attenuation coupled with the improved performance and power handling capability of BAW. The TQQ7303 has a usable bandwidth of 75MHz with minimum attenuation of 45dB at 1805MHz, a significant improvement over competitive SAW devices. TriQuint’s TQQ7307 offers 70MHz…
RFMW, Ltd. announces design and sales support for low Passive Inter-Modulation (PIM) terminations from EMC Technology. The 32P7197F, 110W flange mount termination boasts a PIM spec of -127dBc with two 20W input tones. Designed for demanding infrastructure applications, EMC’s 32P7197F operates to 2GHz with a maximum VSWR of 1.25:1. This termination can handle peak powers up to 1100 watts based on a 10 microsecond pulse width with one percent duty cycle. Featuring a tab launch and integrated heat sink, the 32P7179F finds applications in mobile network infrastructure, broadcast amplifiers, high power isolators and instrumentation. Nominal impedance is 50 ohms with…
In a recent Microwave Product Digest interview, RFMW, Ltd. President and CEO Joel Levine highlighted RFMW’s position as a specialized distributor of RF and microwave components and the challenges that lay ahead in the ever evolving consumer and military markets. Read the article.
The TriQuint 856774 SAW filter is specifically designed for low signal distortion in both amplitude and phase response. Ideal for 3G and 4G infrastructure applications, the 856774 is centered at 140MHz with a 56MHz bandwidth. Greater than 40dB attenuation and flat in-band performance combine to offer very low EVM contribution in high performance, wideband communication systems. TriQuint’s 856774 140MHz SAW filter can be used in either balanced or single-ended circuits and is housed in a hermetic, ceramic, surface-mount package measuring only 9.1×4.8×1.24mm.
RFMW , Ltd. announces application and sales support for the Telemakus TEP4000-5 digital phase shifter. This laboratory quality phase shifter has a minimum phase range of 360 degrees with 12-bit, 0.25 degree resolution and operates over the bandwidth of 2 to 4GHz. Maximum RF input for linear operation is +6dBm but the device can handle up to +20dBm. Typical insertion loss through the TEP4000-5 is only 5dB. When coupled with the TEA4000-7 USB controlled RF attenuator, a gain and phase control system can be created. Applications include phased array antenna testing. Weighing less than an ounce each, Telemakus test devices…
RFMW, Ltd. announces design and sales support for two S-band power amplifiers from TriQuint. The TGA2583 and TGA2585 cover the frequency range of 2.7 to 3.7GHz with 10 and 18 watts of saturated output power respectively. Both TriQuint devices offer power added efficiency of 54% with a small signal gain of 33dB. Designed primarily for Radar applications, the TGA2583 and TGA2585 use TriQuint 0.25um GaN technology offering good thermal characteristics in either pulse or CW operation. Using a 25V bias, the TGA2583 draws 175mA while the TGA2585 draws 225mA. Both devices are currently available in 3×1.9mm die with 5×5 QFN…
Telemakus LLC has announced a price reduction of their model TEP8000-6, digital phase shifter. This USB controlled device offers 360 degrees minimum phase range with 12-bit, 0.25dB resolution over the frequency range of 4-8GHz. Maximum RF input for linear operation is +10dBm. Typical insertion loss through the TEP8000-6 is only 5dB. When coupled with the Telemakus TEA8000-6 USB controlled RF attenuator, a gain and phase control system can be created. Applications include phased array antenna testing. Weighing less than an ounce each, Telemakus test devices represent the latest technology in low cost, transportable test equipment. Each unit’s graphical user interface…
