RFMW, Ltd. announces design and sales support for broadband directional couplers from P1dB. Operating from 0.5 to 18GHz, these coaxial, SMA connectored directional couplers offer coupling factors of 10, 20 and 30dB as follows: P1CP-SAF-R518G30W-10 (10dB), P1CP-SAF-R518G30W-20 (20dB), P1CP-SAF-R518G30W-30 (30dB). All models can handle input power levels as high at 30W. Directivity for the P1CP-SAF-R518G30W-10 (10dB), P1CP-SAF-R518G30W-20 (20dB) is 22dB while model P1CP-SAF-R518G30W-30 offers 20dB directivity. All three P1dB directional couplers are standard products and P1dB offers additional coupling factors upon request.
Author: RFMW
RFMW , Ltd. announces design and sales support for the PE42422 UltraCMOS SPDT RF switch from Peregrine Semiconductor. The enhanced frequency range of the PE42422 pushes down to 5 MHz providing broadband performance from 5 – 6000MHz. Typical insertion loss of 0.25dB @ 1000MHz with 44dB isolation is maintained. This reflective switch from Peregrine integrates on-board CMOS control logic requiring no external components and supports a wide supply voltage range of 2.3 to 5.5V. IIP2 of 115dBm highlights the PE42422’s performance. Housed in a 2x2mm QFN package, ESD tolerance is 4kV HBM on the RF pins.
RFMW, Ltd. announces design and sales support for 65GHz coaxial attenuators using 1.85mm connectors. P1dB offers a series of these attenuators with available fixed attenuation values of 3dB, 6dB, 10dB, 20dB and 30dB. With a maximum VSWR of 1.35:1, these P1dB attenuators find applications in test and measurement production environments and optical networking. The table below defines the part numbers for the associated fixed values.
RFMW, Ltd. announces design and sales support for a Qorvo notch filter designed to protect CATV line amplifiers and UHF/LTE Band 20 systems from interference. Trademarked LowDrift technology gives the 857253 Temperature Compensated Surface Acoustic Wave (TC-SAW) filter nearly twice the temperature stability of competing devices. Centered at 828MHz with a 68MHz notch bandwidth, the 857253 is applicable for single ended, 75 ohm operation. The Qorvo 857253 is offered in a 1.4×1.2×0.46mm, hermetically sealed package.
RFMW, Ltd. announces design and sales support for the API Weinschel 1515-1 resistive power divider. The 1515-1 offers SMA female connectors on all ports allowing a miniature design that’s capable of supporting 18GHz applications. Rated at 1W CW, the API Weinschel divider can handle up to 1kW peak power input. Phase tracking between ports is 5 degrees maximum while amplitude tracking is 0.5dB max at 18GHz. Insertion loss beyond the 6dB nominal is only 1.5dB at 18GHz. The miniature design of the API 1515-1 measures 1.17 x 1.14 inches. Each unit is supplied with test data.
RFMW, Ltd. announces design and sales support for a bulk acoustic wave (BAW) filter designed for 2.4GHz WLAN/WiFi/Blue Tooth coexistence with 4G LTE and TD-LTE signals in adjacent bands B7, B41, B38 and B40. The Qorvo 885128 exhibits exceptional rejection performance allowing these various technologies to operate simultaneously and in close proximity. The 885128 offers up to 25% less temperature drift than competing technologies and supports extended temperature ranges of -40 to +95 degrees C. Peak power handling for the Qorvo 885128 is a respectable +36dBm considering the industry leading small package size of 1.1×0.9×0.5mm. With single-ended operation, the 885128…
RFMW, Ltd. announces design and sales support for the Skyworks, Inc. SKY67159-396LF, a 200 to 3800MHz low noise amplifier (LNA) designed for applications including IoT (Internet of Things), small cell infrastructure, tower mounted amplifiers and remote radio units. The SKY67159-396LF’s excellent thermal characteristics allow in-system performance up to +105 degrees C. Broadband performance is achieved with a single matching circuit providing superior gain flatness, low noise figure (<1dB) and good linearity (31dBm OIP3). Flexible biasing supports operation from 3 to 5V with related supply current from 30 to 100mA. The Skyworks SKY67159-396LF is available in a 2x2mm DFM package.
RFMW, Ltd. announces design and sales support for WiFi optimized, coaxial power dividers from P1dB. Offered as a 2-Way divider (P1PD-SAF-0206G30W-2) and 4-Way divider (P1PD-SAF-0206G30W-4), both span an operating frequency range of 2 to 6GHz yet are optimized at 2.4 and 5GHz with increased isolation and improved insertion loss. Configured with SMA connectors, the P1PD-SAF-0206G30W-2 and P1PD-SAF-0206G30W-4 meet the demands of production test systems for routers, cell phones, tablets and other Wi-Fi enabled products.
RFMW, Ltd. announces design and sales support for XMA Corp’s 8582-6150-xx series of 2.4mm, 50 GHz Attenuators. The XMA coaxial attenuators are available in standard dB values of 3, 6, 10, 20 and 30 dB and handle up to 1 Watt of power. The 50 GHz attenuators are in stock at RFMW and are ready to ship the same day.
RFMW, Ltd. announces design and sales support for Peregrine Semiconductor’s PE42920 Dual Differential SPDT switch operating from 10 kHz to 6 GHz. The PE42920 targets test and measurement applications where two independent differential signals are required to be switched. Having both switches in a small, 3x3mm QFN package saves both board space and BOM cost as well as improving performance. Operating from a single 3.3V supply, the Peregrine DDSPDT uses only 100 microamps in typical operation. Yet, this switch has 30dB of isolation between opposite active channels and 26dB isolation between same channel inputs @ 6GHz. With a fast switching…